TGB Blade 250 ATV Quad Service Repair Manual, Page 54Get this manual

TGB Blade 250 ATV Quad Service Repair Manual, Page 54

4FUEL SYSTEM Adjustment of Idle Speed Caution Parking rake Air screw was set at factory, so no adjustment neededNote the
turnsStandard turns: turns Warm up engine; adjust the throttle stopper screw of throttle valve to standard RPMIdle speed
rpm: 1700 100 rpm Connect the hose of exhaust analyzer to exhaust front endPress test key on the analyzerAdjust the pilot
screw and read CO reading on the analyzer CO standard value: 1.0-1.5 Accelerate in gradual increments; make sure rpm and