TGB Blade 250 ATV Quad Service Repair Manual, Page 92Get this manual

TGB Blade 250 ATV Quad Service Repair Manual, Page 92

8V-BELT DRIVING SYSTEM Drive Belt Removal Remove left crankcase coverHold drive face with universal holder, and remove nut
diagram shown so that the belt can be loosened, and then remove the driven pulleyRemove driven pulleypulleyDo not remove
drive beltRemove the drive belt from the groove of driven Inspection Check the drive belt for crack or wearif necessaryMeasure
the width of drive belt as diagram shownService Limit: 22.5 mm Replace the belt if exceeds the service limitReplace it Caution