TGB Blade 250 ATV Quad Service Repair Manual, Page 160Get this manual

TGB Blade 250 ATV Quad Service Repair Manual, Page 160

14FRONT BRAKEFRONT WHEEL Brake fluid rnnInn ,ement Air-bleed Connect drain hoac lu dir-bleed valveOpen the drain valve on
and operate the brake lever to check whether air bubble is in brake system or notIf brake is still soft, please bleed the
system as described below: 1Tightly hold the brake lever and open the drain valve around 114 turns, and then close the valve
Do not release the brake lever before the drain valve is closed0 Always check the brake fluid level when carrying out the
air bleeding procedure to avoid air enters into the system2Slowly release the brake lever, and wait for few seconds until
it reaches its top position3Repeat the steps and until there is no air bubble at the end of the hose4Tightly close the drain
valve5Make sure the brake fluid is in the UPPER level of the master cylinder, and refill the fluid if necessary6Cover the