TGB Blade 250 ATV Quad Service Repair Manual, Page 187Get this manual

TGB Blade 250 ATV Quad Service Repair Manual, Page 187

16REAR BRAKEREAR WHEELREAR CUSHION Brake fluid replacement Air-bleed Connect drain hose to air-bleed valveOpen the drain
on the brake leverClose the drain valve when finishing the brake system refilling fluid procedure, and operate the brake
lever to check whether air bubble is in brake system or notIf brake is still soft, please bleed the system as described below:
1Tightly hold the brake lever and open the drain valve around 114 turns, and then close the valve Do not release the brake
lever before the drain valve is closed0 Always check the brake fluid level when carrying out the air bleeding procedure to
avoid air enters into the system2Slowly release the brake lever, and wait for few seconds until it reaches its top position3Repeat