TGB Blade 250 ATV Quad Service Repair Manual, Page 188Get this manual

TGB Blade 250 ATV Quad Service Repair Manual, Page 188

16REAR BRAKEREAR WHEELREAR CUSHION Rear Brake Caliper Removal Place container under the brake caliper, and loosen the brake
groove close to the brake disk Installation Install the brake caliper and tighten the attaching bolts securelyTorque: 3.25kgf-m
Caution Use M8 20 mm flange bolt onlyLong bolt will impair the operation of brake diskUse two seal washers and hose bolts
to lock the hose and brake caliper in placeTorque: 3.5kgf-m Refill up the brake fluid to the reservoir and make necessary