2000 Arctic Cat ATV Factory Service Manual, Page 15Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 15

Preparation For Storage ! CAUTION Prior to storing the ATV, it must be properly serviced to prevent rusting and component
cap screws, and screws are tightened to specifications9Make sure the steering moves freely and does not bind10Check the spark
plugClean or replace as necessary11Inspect the air filter and air cleaner housing for obstructions12Check and inflate tires
to recommended pressure Arctic Cat recommends the following procedure to prepare the ATV for storage1Clean the seat cushion
with damp cloth and allow it to dry2Clean the ATV thoroughly by hosing dirt, oil, grass, and other foreign matter from the
entire ATVAllow the ATV to dry thoroughlyDO NOT get water into any part of the engine3Either drain the gas tank or add Fuel
Stabilizer (pn 0638-165) to the gas in the gas tankRemove the air cleaner cover and air filterStart the engine and allow
it to idle; then using Arctic Cat Engine Storage Preserver (pn 0636-177), rapidly inject the preserver into the air filter
opening for period of 10 to 20 seconds; then stop the engineInstall the air filter and cover4Plug the exhaust hole in the