2000 Arctic Cat ATV Factory Service Manual, Page 30Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 30

2Slide the rubber boot away and turn the adjuster until the throttle cable has proper free-play of 3-6 mm (1814 in at the
securely connected to the carburetor and the opposite end is always open Adjusting Engine RPM (Idle) To properly adjust the
idle RPM, tachometer is necessaryTo adjust idle RPM, use the following procedure1With the transmission in neutral, start
the engine and warm it up to normal operating temperature2Turn the idle adjustment screw clockwise one turn past the recommended
RPM setting; then turn it counterclockwise to the correct RPM settingFig2-53 Adjusting Throttle Cable To adjust the throttle
cable free-play, follow this procedure1Slide the rubber boot away; then loosen the jam nut from the throttle cable adjusterFig2-51