2000 Arctic Cat ATV Factory Service Manual, Page 31Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 31

3Remove both drain plugs from the bottom of the engine and drain the oil into drain panFig2-56 AH600DA IDLE RPM MODEL All
OIL-FILTER Change the engine oil and oil filter at the scheduled intervalsThe engine should always be warm when the oil is
changed so the oil will drain easily and completely1Park the ATV on level ground2Remove the oil filler plugFig2-55 CH080DA
NOTE: Clean up any excess oil after removing the filter 6Apply oil to the O-rings and check to make sure they are positioned