2000 Arctic Cat ATV Factory Service Manual, Page 36Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 36

2Loosen the jam nut securing the adjustment screwRear Drive 400 cc500 cc ATV-1096 4After all the lubricant has been drained,
turn; then lock the jam nut securing the adjustment screwFig2-79 ! CAUTION Water entering the outer end of the axle will
not be able to enter the rear drive unless the seals are damaged Adjusting Clutch (250300 cc) To adjust the clutch, use the
following procedure1Using an impact driver, remove the coverAccount for the O-ringFig2-77 NOTE: At this point the clutch
should be adjusted correctlyTest ride the ATV to ensure accurate adjustment 5Secure the cover making sure the O-ring is properly