2000 Arctic Cat ATV Factory Service Manual, Page 38Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 38

TIRE INFLATION PRESSURE On all models, front and rear tire inflation pressure should be 0.35 kg-cm2 (5.0 psi)A low-pressure
timing can aid in troubleshooting other componentsTo verify engine timing, use the following procedure1Attach the engine
Timing Light (pn 0644-197) to the spark plug high tension lead; then remove the timing inspection plug from the left-side
crankcase cover2Using the Arctic Cat Engine Tachometer (pn 0644-275), start the engine and run at the recommended RPM; ignition
timing should be the recommended degrees BTDCIGNITION TIMING MODEL TIMINGRPM below 1800 35 above 3800 below 1800 30 above
3800 10 1500 DriveshaftCoupling The following drive system components should be inspected periodically to ensure proper operationASpline
lateral movement (slop)BRubber coupling cracked, damaged, or worn 250 cc 300 cc 400500 cc 3Install the timing inspection
plug SuspensionShock AbsorbersBushings The following suspension system components should be inspected periodically to ensure
proper operationAShock absorber rods bent, pitted, or damagedBRubber damper cracked, broken, or missingCShock absorber body