2000 Arctic Cat ATV Factory Service Manual, Page 44Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 44

Fig2-100 ATV0088C 2If the rear wheels are locked, it is adjusted properly3If the rear wheels are not locked, it must be adjusted
number of times to ensure the wheels lock and the brakelight illuminates properly 2Pull the brake cable to the left and push
the adjuster arm to the right3While holding the cable and adjuster arm in this position, finger-tighten the left-hand jam
nut until it contacts the adjuster arm; then loosen it 12 turns4Tighten the right-hand jam nut securely against the adjuster
arm 6If the rear cable adjustment is inadequate to attain the proper brake pedal arm free-play gap, make adjustment at the