2000 Arctic Cat ATV Factory Service Manual, Page 60Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 60

Removing Engine Transmission (400500 cc) 7Loosen the exhaust pipe from the muffler at the juncture in front of the muffler;
and remove the seat2Remove the battery by removing the negative cable first and then the positive cable ! CAUTION Battery
acid is harmful if it contacts eyes, skin, or clothingCare must be taken whenever handling battery 3Drain the oil from beneath
the enginetransmission; then drain the cooling systemFig3-60 9Mark the reverse gear shaft arm to the reverse shift shaft
to aid in assembly and remove the cap screw securing the reverse gear shaft arm to the reverse shift shaft; then route the
cable and arm away from the enginetransmissionFig3-63 ATV-0109 4Drain the gas from the gas tank; then remove the tank (see
Section 4)5Remove the front fenders and the front rack (see Section 8)6Remove the two cap screws securing the exhaust header