2000 Arctic Cat ATV Factory Service Manual, Page 64Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 64

5Connect the lower coolant hose to the water pump housing and secure with the clampFig3-81 10Install the carburetor assembly
on the rear output joint; then install the four cap screws (coated with red Loctite #271) and tighten to 2.8 kg-m (20 ft-lb)Fig3-86
7Connect the battery ground (negative) cable to the crankcase coverFig3-83 8Install the high tension lead on the spark plug9Connect