2000 Arctic Cat ATV Factory Service Manual, Page 81Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 81

! CAUTION Incorrect installation of the piston rings will result in engine damage Fig3-198 1Install the piston on the connecting
then remove the piston holder and seat the cylinder firmly on the crankcase ! CAUTION Fig3-197 The cylinder should slide
on easilyDo not force the cylinder or damage to the piston, rings, cylinder, or crankshaft assembly may occurFig3-199 2Place
the two alignment pins into positionPlace the cylinder gasket into position; then place piston holder (or suitable substitute)
beneath the piston skirt and square the piston in respect to the crankcase 4Loosely install the two nuts which secure the