2000 Arctic Cat ATV Factory Service Manual, Page 87Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 87

Fig3-222 Fig3-224 DAlign the valve adjuster handle with one of the marks on the valve adjuster dialEWhile holding the valve
Fig3-225 KEY 12345678 FWhile holding the adjuster dial at the proper clearance setting, tighten the jam nut securely with
the valve adjuster handle30Place the two tappet covers with O-rings into position; then tighten the covers securelyFig3-223
Cylinder Stud Bolt Nut Cylinder Gasket Pin Water Hose Union Cap Screw O-ring 0732-301 NOTE: If the piston rings were removed,
install them in this sequence AInstall thin oil ring, corrugated oil ring, and thin oil ring in the bottom groove of the