2000 Arctic Cat ATV Factory Service Manual, Page 90Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 90

Fig3-233 Fig3-236 7Place the head gasket into position on the cylinderPlace the alignment pins into position; then place
only until snug 10In crisscross pattern, tighten the four cylinder head cap screws to 3.8 kg-m (27.5 ft-lb); then tighten
the mm nut to 2.5 kg-m (18 ft-lb)Using crisscross pattern, tighten the four mm nuts to 1.1 kg-m (8 ft-lb)Tighten the two
cylinder to crankcase nuts securely11With the timing inspection plug removed and the chain held tight, rotate the crankshaft