2000 Arctic Cat ATV Factory Service Manual, Page 93Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 93

20Remove the cap screw from the end of the chain tensioner; then using flat-blade screwdriver, rotate the adjuster screw
adjuster shaft tension will be released in step 22 Fig3-253 21Place the chain tensioner adjuster assembly and gasket into
position on the cylinder and secure with the two Allen-head cap screwsFig3-250 23Rotate the crankshaft until the second cap
screw securing the sprocket can be installed; then install the cap screw (coated with red Loctite #271) and tighten to 1.15
kg-m (8.5 ft-lb)Bend the tab to secure the cap screwCC011D Fig3-251 24Rotate the crankshaft until the first cap screw securing