2000 Arctic Cat ATV Factory Service Manual, Page 95Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 95

Left-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
for this procedure 3Lay the enginetransmission on its right side; then remove the cap screws securing the left-side cover
to the crankcase and note the location of the different-sized cap screwsFig3-260 Removing Left-Side Components (250300 cc)
ARecoil Starter BSpeedometer Drive CCoverStator Assembly 1Remove the cap screws securing the recoil starter assembly to the
left-side cover; then remove the starter noting the location of the single washerAccount for the gasket AT THIS POINT 4Remove