2000 Arctic Cat ATV Factory Service Manual, Page 100Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 100

22Remove the Phillips-head screws securing the shift-indicator sending unit; then remove the sending unitAccount for an O-ring,
crankcase components only, proceed to Removing Right-Side Components Removing Left-Side Components (400 cc 2x4) ACoverStator
Assembly 1Remove the four cap screws securing the recoil cover to the left-side cover; then remove recoil coverAccount for
the gasket 4While continuously tapping in on the shift shaft, remove the left-side cover wstator assemblyAccount for gasket
and two alignment pinsNOTE: Inspect the inside of the left-side cover for any shaft washers (W) and spacers (S) that may