2000 Arctic Cat ATV Factory Service Manual, Page 105Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 105

Fig3-315 Fig3-318 7Lay the enginetransmission on its right side; then remove the fourteen cap screws securing the left-side
then install the magneto rotor puller adapterFig3-319 Fig3-317 Fig3-320 8Using Side Case Puller (pn 0644-262), remove the
side coverAccount for gasket, two alignment pins, and an idle gear limiter bushingNOTE: Inspect the inside of the left-side
cover for any shaft washers that may have come off with the coverMake sure they are returned to their respective shafts and