2000 Arctic Cat ATV Factory Service Manual, Page 117Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 117

Fig3-375 Fig3-378 15Place the magneto rotor into position on the crankshaft making sure the key is in placeFig3-376 CStator
17Install the rotor nut on the crankshaft and tighten until the rotor is properly seated; then tighten to 16 kg-m (115.5
ft-lb)Fig3-379 16Install the starter idler gear and shaft; then install the spacerFig3-377 18Place the gasket and left-side