2000 Arctic Cat ATV Factory Service Manual, Page 120Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 120

Fig3-391 Fig3-394 9Install the shift shaft on the gear shift shaft; then install the circlip and washerFig3-392 Fig3-395
then install the magneto nut on the crankshaft and tighten until the rotor is properly seatedTighten to 16 kg-m (115.5 ft-lb)Fig3-396
11Place the starter clutch gear assemlby onto the crankshaft; then place the key into its notch 13Install the two alignment