2000 Arctic Cat ATV Factory Service Manual, Page 121Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 121

Fig3-397 Fig3-399 CC512DA CStator AssemblyCover NOTE: Steps 1-13 in the preceding sub-section must precede this procedure
shaft to establish covercrankcase mating 15Install the fourteen cap screws to secure the left-side coverNote the location
of the long cap screw with rubber gasketFig3-398 Installing Left-Side Components (400 cc 4x4500 cc) 16In crisscross pattern,
tighten the cap screws to 0.9-1.3 kg-m (6.5-9.5 ft-lb)17Install the spacer onto the crankshaft; then secure with flange nut