2000 Arctic Cat ATV Factory Service Manual, Page 126Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 126

Fig3-424 ! CAUTION Make sure the speedometer gear and output shaft gear match up during assemblyFig3-427 Fig3-425 Fig3-428
ft-lb)Fig3-426 26Install the inside circlip onto the HiLow range shift shaft with the sharp side of the circlip facing the
engine; then place the shift lever assembly part way onto the shaftNOTE: Position the shift lever part way onto the splines
and verify the subtransmission is in Hi rangeIf not, shift into Hi rangeFig3-429 25Place the speedometer drive adapter and