2000 Arctic Cat ATV Factory Service Manual, Page 139Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 139

MEASURING CAM CHAIN LENGTH (400500 cc) Fig3-489 1Apply approximately 13 kg (28.5 lb) of force to both ends of the cam chain2With
length must be 128.9 mm (5.07 in Installing Right-Side Components (250300 cc) AOil StrainerOil Pump BGear Shift Shaft 1Place
the oil strainer into position beneath the crankcase and tighten with the Phillips-head cap screws (coated with red Loctite
#271) to 0.5 kg-m (3.5 ft-lb) 3Place the oil pump into position on the crankcase and secure with the Phillips-head screws
coated with blue Loctite #242Tighten to kg-m (7 ft-lb)Fig3-491 ! CAUTION The legs of the strainer must be directed out 4Place