2000 Arctic Cat ATV Factory Service Manual, Page 143Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 143

Fig3-505 Fig3-507 NOTE: If alignment marks were not scribed during removing, it may be necessary to reposition the clutch
the proper positionIf any of the incorrect positions are used, the hub and disc will have clearance between them and they
will not operate properly 17Install the clutch shoe and washer; then secure with the starter clutch-shoe nut (left-hand threads)
coated with red Loctite #271Tighten to 13 kg-m (94 ft-lb)Fig3-509 14Place the primary driven clutch assembly onto the countershaftNOTE:
Note the alignment mark scribed on the primary driven gear assembly during disassembly 18Install the release roller assembly