2000 Arctic Cat ATV Factory Service Manual, Page 145Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 145

Fig3-517 Installing Right-Side Components (400500 cc) AOil StrainerOil Pump BGear Shift Shaft 1Place the oil strainer with
2Place the strainer cap into position on the strainer making sure the O-ring is properly installed and secure with the cap
screws; then install and tighten the oil drain plug to 2.3 kg-m (16.5 ft-lb)Fig3-516 5Place the gear shift cam plate and
guide onto the gear shift cam making sure the alignment pin was installedSecure assembly with the cap screw coated with blue