2000 Arctic Cat ATV Factory Service Manual, Page 148Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 148

Fig3-531 Fig3-534 14Install the clutch sleeve hub making sure the marks scribed in removing are alignedThe alignment dots
the starter clutch housing on their respective shafts making sure the sleeve is properly positioned in the primary assemblyFig3-535
Fig3-533 NOTE: Note the alignment mark scribed on the primary driven gear assembly during disassembly 16Using the Clutch
Sleeve Hub Holder (pn 0444-007), install the nut coated with red Loctite #271 and washerTighten to 10 kg-m (72.5 ft-lb) NOTE: