2000 Arctic Cat ATV Factory Service Manual, Page 149Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 149

Fig3-536 NOTE: Tighten the four roller assembly cap screws in crisscross pattern making sure there is no clearance between
with the starter clutch-shoe nut (left-hand threads) coated with red Loctite #271Tighten to 13 kg-m (94 ft-lb); then using
center punch, stake the nutFig3-538 21Secure the clutch release arm with the cap screw coated with blue Loctite #242Tighten
to kg-m (7 ft-lb)Fig3-541 19Install the release roller assembly making sure the four springs are in position; then using
crisscross pattern, secure with the four cap screws to kg-m (7 ft-lb) 22Install the reverse cam stopper housing and gasket