2000 Arctic Cat ATV Factory Service Manual, Page 162Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 162

Fig3-603 4Maximum runout is 0.05 mm (0.002 in for the left side and 0.08 mm (0.003 in for the right side on the 250300 cc,
the 250300 cc, 25.95-26.00 mm (1.022-1.024 in for the 400 cc, and 24.95-25.00 mm (0.9822-0.9842 in for the 500 ccMeasuring
Crankshaft (Runout) ATV-1017 1Place the crankshaft on set of blocks2Mount dial indicator and base on the surface platePosition
the indicator contact at point of the crankshaftFig3-604 2Acceptable width range is 55 mm (2.165 in0.1 mm (0.004 in for the
250300 cc and 70.9-71.1 mm (2.796-2.804 in for the 400500 ccDRIVESHAFT Disassembling 1In order, remove the reverse dog, circlip,
washer (lock washer on the 250300 cc), reverse driven gear, and bushing from the driveshaftFig3-606 ATV-1074 3Zero the indicator