2000 Arctic Cat ATV Factory Service Manual, Page 179Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 179

Fig3-692 Joining Crankcase Halves (250300 cc) 1Verify that the alignment pins are in place and that both case halves are
case halves together until cap screws can be installed3From the left side, install the shift cable bracket and the crankcase
cap screws noting the location of the different-lengthed cap screws; then tighten only until snugNOTE: Rotate the shafts
back and forth to ensure no binding or sticking occurs while tightening the cap screwsFig3-696 16If applicable, install the