2000 Arctic Cat ATV Factory Service Manual, Page 190Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 190

6Lift the throttle cable from the carburetor and route it away from the engine7Loosen the flange clamps; then remove the
DISASSEMBLING 1Remove the four Phillips-head screws securing the top cover; then remove the coverFig4-17 2Remove the diaphragm
from the carburetor body and account for the spring, washer, and piston valve 4Visually inspect and note the direction the
float pin is installed for assembly purposes; then using spring loaded center punch, remove the float pinLift the float with