2000 Arctic Cat ATV Factory Service Manual, Page 192Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 192

! CAUTION DO NOT place any non-metallic components in parts-cleaning solvent because damage or deterioration will result
throttle valve return spring8Inspect float for damage9Inspect gasket and O-rings for distortion, tears, or noticeable damage
10Inspect tips of the jet needle, pilot screw, and the inlet needle valve for wear, damage, or distortion11Inspect the pilot
jet and main jet for obstructions or damageNOTE: If the pilot jet is obstructed, the mixture will be extremely lean at idle
and part-throttle operation 12Inspect the choke plunger and seat for wear or damage13Inspect the carburetor mounting flange
for damage and tightnessASSEMBLING CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in
any way, replacement is necessary 1Install the needle jet by inserting it from the top of the carburetorNOTE: The needle