2000 Arctic Cat ATV Factory Service Manual, Page 197Get this manual

3Place the throttle actuator cover into place and secure with the four Phillips-head screws (with washer and lock washer)Fig4-57
screwdriver, rotate the actuator arm to the full-up position; then using pair of needle-nose pliers, install the cable into
the actuator arm drumFig4-55 4Route the two vent hoses through the slots in the frame5Place the choke cable into position
and install the choke cable housingFig4-58 6Connect the fuel supply hose to the carburetor; then turn the gas tank valve