2000 Arctic Cat ATV Factory Service Manual, Page 199Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 199

CH040DA AL650DA CH041DA AL617DA 7Remove the vent hose; then remove the gas tankCLEANING AND INSPECTING NOTE: Whenever part
connection5Cut the tie-down securing the fuel hose to the cables and hoses6Remove the torx-head screws (250300 cc) or the
two cap screws (400500 cc) securing the gas tank to the frameAccount for two sleeves and two washers 1Place the gas tank
into position on the frame; then install the torx-head screws (250300 cc) or the two cap screws (400500 cc), sleeves, and
washersTighten to 1.7 kg-m (12 ft-lb)2Connect the fuel hose from the carburetor; then secure hose to cables and hoses with