2000 Arctic Cat ATV Factory Service Manual, Page 205Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 205

6Remove the two cap screws securing the radiator to the frame7Remove the radiator and account for the two grommets with collar
1Drain the coolant at the engine2Remove the front rack (see Section 8)3Remove the front fenders (see Section 8)4Remove the
four machine screws securing the fender panels to the radiatorFig4-79 1Place the radiator with grommets and collar inserts
into position on the frame; then install the two cap screwsTighten securely2Install the upper and lower coolant hoses; then
secure with hose clampsFig4-81 5Remove the upper and lower coolant hosesFig4-80 3Place the fender panels into position on