2000 Arctic Cat ATV Factory Service Manual, Page 207Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 207

2Install the crossover coolant hose onto the water pump and engine water inletSecure with the two hose clamps3Slide the upper
motor to the frame; then disconnect the wiring harnessFig4-90 5Fill the cooling system (2.9 or U.Sqt) with antifreezeCheck
for leakageREMOVING FAN NOTE: It is not necessary to drain the cooling system or to remove any coolant hoses for this procedureAF640D
1Remove the left-hand-threaded nut and washer securing the fan blade to the fan motorAccount for shaft pin 3Slide the fan