2000 Arctic Cat ATV Factory Service Manual, Page 212Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 212

Testing Electrical Components All of the electrical tests should be made using the Fluke Model 73 Multimeter (pn 0644-191)If
the battery, fuse, receptacle, connector, or the main wiring harness Brakelight Switch (Foot) The switch connector is the
two-prong connector on the right side of the engine directly above the brake cable adjusterNOTE: The ignition switch must
be in the ON position732-410D VOLTAGE (Wiring Harness Side) Accessory Receptacle Connector (400500 cc) NOTE: This test procedure
is for either the receptacle or the connectorVOLTAGE 1Set the meter selector to the D.CVoltage position2Connect the red tester
to the orange wire; connect the black tester lead to groundFig5-5 1Set the meter selector to the D.CVoltage position2Connect