2000 Arctic Cat ATV Factory Service Manual, Page 260Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 260

Fig6-101 Fig6-104 33Install the spacer onto the bevel gearFig6-102 36Place any shims removed onto the drive bevel gear assembly,
to 2.8 kg-m (20 ft-lb)Fig6-105 34Install the drive bevel gear assembly into its housingFig6-103 38Rotate the drive bevel
gear flange clockwise and counterclockwise number of rotations to seat the bearing; then using torque wrench, determine the
exact inlb needed to rotate the shaftFig6-106 35Place the drive bevel gear flange onto the case housing and place the washer