2000 Arctic Cat ATV Factory Service Manual, Page 266Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 266

Fig6-134 Fig6-136 11Install the wheels and tighten the cap screws to 6.9 kg-m (50 ft-lb)Fig6-135 2Inspect boots for any tears,
the support stand Drive Axles REMOVING 1Remove the drive axlesCLEANING AND INSPECTING NOTE: Always clean and inspect the
drive axle components to determine if any service or replacement is necessary 2Wipe away excess grease to access the retaining
ringUsing an awl or circlip pliers, remove the circlip; then mark the housing to the bearing ringFig6-138 1Using clean towel,