2000 Arctic Cat ATV Factory Service Manual, Page 268Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 268

Fig6-144 Fig6-146 Fig6-145 Fig6-147 9Apply grease from the kit into the knuckles and the new outer bootNOTE: The large grease
the different-sized clamps from removalNOTE: The boot is positioned correctly when the small end of the boot seats down into
the recessed groove 2Secure the small clamp of the inner bootFig6-148 11Secure both outer boot clamps ! CAUTION It is important
that the clamps are positioned correctly or they may loosen when in motion ATV-1048 3Apply grease from the kit onto the bearing