2000 Arctic Cat ATV Factory Service Manual, Page 274Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 274

Fig6-173 ! CAUTION Care should be taken not to damage or kink the brake hose when installing the caliper 5Place the mechanical
for tightness and check the brakes for proper operation before test ridingAF772D ! CAUTION Do not tighten nuts beyond the
4.8 kg-m (35 ft-lb) specification or the shock eyelet or mount WILL be damaged Wheel Hub REMOVING 4Place the hydraulic brake
caliper into position on the housing bracket; then secure with the cap screws tightened to 2.8 kg-m (20 ft-lb)Fig6-175 1Secure
the ATV on support stand to elevate the wheel; then remove the wheel ! WARNING Make sure the ATV is solidly supported on
the support stand to avoid injury 2Remove the wheel cap from the hub; then remove the cotter pin from the nutNOTE: During