2000 Arctic Cat ATV Factory Service Manual, Page 275Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 275

Fig6-177 CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is
for washer and hub sealFig6-178 6Inspect the hub for cracksINSTALLING 1Secure the brake disc to the hub with the four cap
screws coated with red Loctite #271Tighten to 2.1 kg-m (15 ft-lb)2Apply grease to hub sealing area and on the splinesFig6-180
4Remove the brake caliperFig6-179 3Install the hub assembly onto the splines of the shaftFig6-181 5Remove the hub assembly6Remove