2000 Arctic Cat ATV Factory Service Manual, Page 276Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 276

Fig6-182 Fig6-185 AF611D AF701D 11Remove the ATV from the support stand 5Place the washer onto the shaft; then secure the
Make sure the ATV is solidly supported on the support stand to avoid injuryAF615D 7Tighten the hub nut to 11.8 kg-m (85 ft-lb)8Install
new cotter pin and spread the pin to secure the nutFig6-184 2Drain the brake fluid from the entire hydraulic system (master
cylinder, hoses, and caliper)Fig6-186 ! CAUTION Brake fluid is highly corrosiveDo not spill brake fluid on any surface of