2000 Arctic Cat ATV Factory Service Manual, Page 277Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 277

3Remove the brake hose from the caliper; then remove the caliperFig6-187 Fig6-188 3Place the brake caliper assembly into
caliper components (except the brake pads) with parts-cleaning solvent2Inspect the brake pads for damage and excessive wearNOTE:
For measuring brake pads, see Section 2ASSEMBLINGINSTALLING 1Push the pistons into the caliper as far as they will go to
allow clearance for the brake pads ! CAUTION Care should be taken that the piston and cylinder are not scratched 2Install
the brake pads and secure with the pin and cotter pinAF611D 7Remove the ATV from the support stand and verify brake operation