2000 Arctic Cat ATV Factory Service Manual, Page 285Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 285

3Route the brake hose through the upper A-arm shock absorber mountFig7-20 7Apply grease to hub sealing area and on the splinesAF627D
to 4.8 kg-m (35 ft-lb)Fig7-21 9Insert the hub seal onto the shaft; then position it into the hubFig7-24 6Install the tie
rod end and secure with the nutTighten to 4.2 kg-m (30 ft-lb); then install new cotter pin and spread the pin to secure the
nutNOTE: During assembly, new cotter pins should be installedAF701D 10Place the washer onto the shaft; then secure the hub