2000 Arctic Cat ATV Factory Service Manual, Page 287Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 287

! WARNING Do not mix tire tread patternsUse the same pattern type on front and rearFailure to heed warning could cause poor
and right-side wheels separated for installing them on their proper sidesFig7-29 2Tighten cap screws to 6.9 kg-m (50 ft-lb)CHECKINGINFLATING
1Using an air gauge, measure the air pressure in each tireAdjust the air pressure as necessary to meet the specified pressureAF611D
2Inspect the tires for damage, wear, or punctures CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked,
or damaged in any way, replacement is necessary ! WARNING Do not operate the ATV if tire damage existsNOTE: If repair is
needed, follow the instructions found on the tire repair kit or remove the wheel and have it repaired professionally 1Clean
the wheels and hubs with parts-cleaning solvent2Clean the tires with soap and water3Inspect each wheel for cracks, dents,