2000 Arctic Cat ATV Factory Service Manual, Page 290Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 290

Steering Post HandlebarTie Rods 5Remove the cotter pin and slotted nut securing each tie rod end to the steering post actuator
Ball Joint Ball Joint Nut Tie Rod Bulb Harness Bracket Rubber Mount Washer Retainer Pin Loom Tube Key Cover 735-354A 6Remove
the cotter pin and slotted nut securing each opposite side tie rod end to the knucklesRemove the tie rod ends from the knuckles;
then remove the tie rods7Remove the cap screws securing the bearing flange to the support bracketFig8-4 REMOVING 1Remove
the seat2Turn the gas tank valve to the OFF position; then remove the left-side panel3Disconnect the fuel hose to the carburetor4Remove