2000 Arctic Cat ATV Factory Service Manual, Page 296Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 296

5Install the knuckle onto the ball joints and secure with the two cap screwsTighten to 5.5 kg-m (40 ft-lb)Fig8-29 8Install
to 4.2 kg-m (30 ft-lb); then install new cotter pin and spread the pinNOTE: During assembly, new cotter pins should be installedFig8-30
9Insert the hub seal onto the shaft; then position it into the hubFig8-33 10Place the washer onto the shaft; then secure