2000 Arctic Cat ATV Factory Service Manual, Page 297Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 297

MeasuringAdjusting Toe-InToe-Out 1Thoroughly wash the ATV to remove excess weight (mud, etc2Refer to the specifications and
secure the nut14Install the wheel cap15Install the wheel and tighten the cap screws to 6.9 kg-m (50 ft-lb)Fig8-36 3Place
the ATV in level position taking care not to push down or lift up on the front end; then turn the handlebar to the straight
ahead positionNOTE: When measuring and adjusting, there should be normal operating load on the ATV (without an operator but
with Arctic Cat approved accessories) 4Measure the distance from the outside edge of each handlebar grip to the seat catch